How to Dye Black Hair Red

Rate this post

If you have black hair and have always wanted to try dyeing it red, you may do it from the comfort of your own home. Because just 2% of the population has red hair, becoming red will make you stand out. When dying black hair red, however, specific care must be made. It’s just a matter of time until you’re showing off your gorgeous red locks if you select a color that complements your complexion, colour your hair appropriately, and care for it properly afterwards.

You are viewing article How to Dye Black Hair Red at website answerforyou.net.

Choosing the Right Dye

1. Choose the hue that best complements your skin tone. You may color your hair several various hues of red, including auburn, strawberry, brick, mahogany, and others. Choose a red that complements your skin tone, whether you have cool-toned pale skin, warm-toned dark skin, or anything in between.
Hold a patch of hair near to your face to evaluate whether the color complements your skin tone. You have a cool skin tone if you have pink, red, or blue undertones. You have a warm skin tone if you have peachy, golden, or yellow undertones. If you have a mix of the two, your skin tone is probably neutral. If you have warm undertones, choose a genuine red, rich auburn, or burgundy. If you have a cold skin tone, choose crimson velvet, aubergine red, or mahogany. Dark reds may make you seem overly pale if you have light complexion. Instead, try copper or strawberry blonde. On darker complexion, bright, strong hues like fire engine red, blackberry, violet red, and burned orange look excellent.

2. Select a permanent dye. Hair color comes in two varieties: permanent and temporary. Permanent coloring raises the cuticle of the hair and lasts for months. Temporary color, which is applied over natural hair color, will persist for a few days or weeks. You’ll need a permanent dye to colour your black hair red. Look for a product that is the right shade of red and is branded “permanent.”

3. Examine the state of your hair. Ask yourself if your hair is in good enough condition to be coloured. Because bleach and hair dye can damage your hair, it is unsafe to colour hair that is already damaged and/or has been dyed extensively.

  • You will not be able to lighten your hair if it has already been colored black.
  • Only the roots where the color has spread will be removed. This means you’ll need to use bleach to remove the pigment before dying it red, which will be difficult for damaged hair.
  • Color is usually more realistic in virgin hair (hair that hasn’t been coloured previously).
  • Inform your stylist if your hair has previously been colored.
  How to Store Rice Cakes

4. Purchase all of the necessary supplies and goods. Make a shopping list and gather the essential goods from a nearby beauty store before attempting to colour your hair. Other materials, such as developer and bleach, will be required in addition to the dye. Applicator brushes, plastic mixing basins, plastic clips, a shower cap, plastic gloves, and maybe more are also required.
Ion sensitive developer is ideal for persons with sensitive skin.

Dyeing Your Hair

1. You should bleach your hair. If your hair is resistant to dye or has already been dyed, you will need to bleach it before dying it to get the desired shade of red. With an applicator brush, combine bleach and 10 or 20 volume developer in a dish until it has the consistency of yogurt. Put on some plastic gloves and a cape to avoid scorching your skin or ruining your clothing. Part your hair with the applicator brush’s pointed end and apply the bleach from root to tip. Continue forming additional portions and covering your hair with bleach until it is totally coated. Allow the bleaching process to continue until your hair has reached the desired amount of lightness. Then wash it out with shampoo and condition your hair. If you want your hair to be a light and/or brilliant red, you may need to wait a few weeks and repeat the bleaching procedure to get a real blonde. However, a second bleaching may result in breaking.

  • The best technique to attain the desired lightness without seriously harming your hair is to dye it in stages over many weeks.
  • If your hair is virgin, do not bleach it. L’Oreal Excellence HiColor Reds for Dark Hair Only in H8 may be able to give you red hair without first bleaching your black hair.
  • Too much bleaching may cause serious damage and breakage, so restrict how long you leave it on your hair and how often you apply it.

2. Section and brush your hair. Brush your hair properly to avoid snarls. Then, using plastic clips, divide your hair into four equal-sized parts.
You may also apply Vaseline to your hairline at this stage to avoid turning your skin orange.

  How to Cook Frozen Salmon

3. Combine the ingredients. Fill the mixing dish halfway with dye and 10 volume developer. Measure them out using a measuring cup according to the directions on the bottle or container, then mix them together in the bowl with the applicator brush until the dye is smooth. The mixture should have the consistency of paste and should not be too runny.

4. Apply the colour to your hair. Unclip a portion of your hair. Begin applying the color with an applicator brush an inch or two (2.5-5 cm) away from your roots. Saturate the hair all the way down to the ends of the strands. This procedure should be repeated for each part of hair.

  • When applying color, use plastic gloves. Otherwise, your hands will be stained.
  • Except for your roots, apply the colour everywhere. Because you have virgin hair at the roots, doing the roots first may result in roots that are a different hue than the rest of your hair.
  • If you have long and/or thick hair, consider filling a squirt bottle with the color and applying it that way.
  • Don’t forget to color the little hairs around your ears. You could use your finger to reach them.

5. Allow the hair to process before applying colour to the roots. Then, put on a shower cap and allow the coloring process for the time specified by the product. Remove the shower cap and paint your roots red with the dye after roughly half of the processing time has passed. Then replace the cap and let your hair finish processing.

6. Cleanse and condition your hair. When the timer goes off, thoroughly wash the color out of your hair using a coloured hair shampoo. After that, rinse it out and condition your hair using a conditioner developed specifically for colored hair. Finally, rinse the conditioner out.

  • Use lukewarm or cold water, never hot water, since this can cause the color to fade.
  • Sulfate-containing shampoos should be avoided. They have the potential to remove color from your hair more quickly.

Caring for Your Red Hair

1. Wash your hair at least twice a week. Because the molecules that make up the dye are big, red hair color fades quickly. Resist the impulse to wash your hair often to slow down the fading process.

  • Wash your hair no more than every other day.
  • If your hair becomes greasy quickly, use dry shampoo to keep it appearing clean in between washes.
  • Avoid taking hot showers. Hot water can accelerate the fading of your color.
  How to Dispose of Lighters

2. Retouch the red color. Red hair colour is easily faded. To keep your hair appearing rich, use a semi-permanent or demi-permanent colour on it from time to time. Use a permanent color to touch up the roots if necessary.

3. Condition your hair well. Remember that coloring your hair might be harmful. As a result, you should do deep conditioning treatments on your hair on a regular basis, particularly if you’ve recently coloured it.
Also, remember to condition your hair after every wash.

Can you dye your hair red over black?

If you have black hair and wish to get red, you must first remove the color. This is due to the fact that dye only adds color; it does not remove color. The simplest method to accomplish this is using bleach, but if you don’t want to use bleach, you must first use a color removal agent.

What red dye works on black hair?

Red Hair Dye Products for Black Hair
To obtain the red hue, you will need a box dye product or red hair dye for dark hair. For dark hair, we suggest L’Oreal Excellence HiColor. This product is available in a variety of red tones ranging from more orange to pinker hues.

Can I dye my black hair burgundy without bleaching?

The first option for coloring dark hair without bleach is to use a temporary hair color designed for use with a dark base color. These hair colors are designed to be brilliant and real without the need to lighten your dark strands first.

What dye works on black hair?

You can tint your black hair whatever color you like without using bleach. Without bleach, you may get light brown, red, dark red, blue, magenta, purple, and even lighter hues like blonde. Just because you aren’t using bleach doesn’t mean you can’t get the desired hue.

Can you dye hair red without bleaching?

You can color your hair red without using bleach. Bleaching and hair coloring are inextricably linked because bleach raises your hair’s natural hue and provides a brighter basis for the dye to attach to.

Why you shouldn’t dye your hair red?

Because the molecules in red pigment are significantly bigger than the molecules in other hues, the color will not completely penetrate and stain the hair the first few times you attempt it. As a result, there will be a lot of fading, which may sometimes make the color seem more transparent and ancient.

Similar Posts