How to Find a Village in Minecraft

Rate this post

Villages are one-of-a-kind, randomly produced buildings in Minecraft that are occupied by villagers. There are farms to get food from as well as chests with goodies. Not to mention the abundance of places to stay in and villages to trade with. Here’s how to discover a Minecraft town, whether you want to stay, visit, or plunder!

You are viewing article How to Find a Village in Minecraft at website answerforyou.net.

On Desktop

1. Launch Minecraft. Click PLAY at the bottom of the Minecraft launcher after selecting the dirt block-shaped Minecraft symbol.

2. Choose Singleplayer. It’s right in the center of the Minecraft window. This displays a list of your singleplayer worlds.

3. Choose a planet with cheats enabled. To load the planet in question, double-click it. To locate a town in Minecraft, your chosen planet must have cheats enabled.
If you don’t already have a world with cheats allowed, click Create New World, provide a name for the world, click More World Options…, choose Allow Cheats: OFF, and then click Create New World.

4. Launch the console. To do so, use the / key. At the bottom of the window, the console text box will appear.

5. Enter the “find” command. Enter find Village and hit the Enter key.

  • The capital “V” in “Village” is critical, since a lower-case “v” results in a faulty command.
  • In certain current versions of Minecraft, a little “v” may be required instead of a capital “V.”

6. Examine the outcomes. Near the bottom of the Minecraft window, you should notice a white-text message that says “Located Village at x-coordinate [z-coordinate].”

  • For example, “Located Village at 123 (y) 456” may appear here.
  • The y-coordinate (altitude) is frequently unknown, therefore you’ll have to determine it via trial and error.

7. Enter the command “teleport.” Reopen the console and enter teleport [player]. [x-coordinate] [y-coordinate] [z-coordinate], substituting the bracketed data with your username and the village coordinates. You must estimate the y coordinate.

  • In the above example, you would type teleport Waffles 123 [guess] 456 for a player called “Waffles.” The case of names matters.
  • For the y-coordinate, try a value between 70 and 80.
  • If you’re using Minecraft 1.12 or above, you may replace your username with the selector @s.

8. Enter the code. This executes your teleport instruction. You will land in, above, or below the town as long as the y-coordinate isn’t so high that the fall kills you or puts you within a wall.

  • Dig up to reach the settlement if you’re underground.
  • If you spawn within a wall in Survival mode, you’ll rapidly suffocate; to avoid this, try mining your way out.

On Mobile

1. Launch Minecraft. Tap the Minecraft app icon, which looks like a dirt block with grass on it.

2. Press the Play button. It’s towards the top of the Minecraft main page.

  How to Fold a Hoodie

3. Choose a planet. Tap the world you wish to load. Unlike Minecraft on PC, you may activate cheats from inside the game, allowing you to choose any planet.

4. Select the “Pause” icon. The two vertical lines at the top of the screen are the key. This brings up the Pause menu.
If your world already has cheats enabled, continue forward to the “Tap the ‘Chat’ icon” step.

5. Select Settings. This option is available in the Pause menu.

6. Scroll all the way down to the “World Options” section. It’s on the right side of the screen, at the bottom of the menu.

7. Click the dark grey “Activate Cheats” button. This switch will become light grey, indicating that cheating has been allowed.

8. When asked, tap Continue. This will take you back to the menu.

9. Restart your game. Tap the x in the upper-right corner of the screen, then choose Resume Game from the Pause menu.

10. Select the “Chat” icon. At the top of the screen, there’s a speech bubble-shaped symbol. Near the bottom of the screen, a text area will emerge.

11. Enter the “find” command. Tap the text box, then type /locate village and tap on the far-right side of the text field.

12. Examine the outcomes. At the bottom of the screen, you should notice a notification that states “The closest Village is at block [x-coordinate], (y? ), [z-coordinate].”
For example, “The closest Village is at block -65, (y? ), 342” would appear here. -616 y 1032

13. Enter the command “teleport.” Reopen the “Chat” window and write /tp [username] [x-coordinate] [y-coordinate] [z-coordinate], replacing the bracketed information with your username and the village coordinates. You must estimate the y coordinate.

  • In the above example, for a player called “hippo,” you would type /tp hippo -65 [guess] 342. The case of names matters.
  • You’ll generally have to estimate the y-coordinate, which defines the height of the hamlet.

14. Tap →. It is located on the far right side of the text area. This will teleport you to the coordinates you entered; as long as the y-coordinate isn’t so high that the fall kills you or so low that you land behind a wall, you will land in, above, or below the settlement.

  • Dig up to reach the settlement if you’re underground.
  • If you spawn within a wall in Survival mode, you’ll rapidly suffocate; to avoid this, try mining your way out.

On Consoles

1. Learn how this strategy works. On console versions of Minecraft, you can’t use commands to discover a village and then teleport to it, therefore you’ll need to find the seed code for a world and then put it into a village finder online to find the location of a village. After that, you’ll be able to go to the village’s location using a map.

2. Launch Minecraft. To do so, click the Minecraft symbol. If you purchased Minecraft on a disc, you must first insert the CD before proceeding.

3. Choose Play Game. It may be found at the top of the main Minecraft menu.

  How to Lace Skate Shoes

4. Choose a planet. To open the world’s page, press A or X when it is chosen.

5. Take note of the world’s seed. You’ll notice a “Seed:” area towards the top of the menu, followed by a lengthy string of digits. To discover communities in your planet, you’ll need to input that string of digits into a webpage on your computer.

6. On a PC, launch the ChunkBase village finder. In your PC browser, go to http://chunkbase.com/apps/village-finder.

7. Enter the seed number for your planet. In the “Seed” text area towards the center of the page, enter the number shown at the top of the Minecraft world menu.

8. Select Find Villages! On the right side of the website, there is a blue button. This will generate yellow dots around the map grid, which represent communities.

9. Scroll down to find your console. In the lower-right corner of the page, click the PC (1.10 and up) box, then choose XOne/PS4 or X360/PS3 from the pop-up menu. The map will be updated to highlight console-specific settlements.

10. If necessary, zoom out. If there are no yellow dots on the map grid, move the slider at the bottom of the window to the left.

11. Determine the location of a settlement. Choose one of the yellow dots on the map, then examine the coordinates that appear below the map’s bottom-left corner. Take note of these coordinates so you know where to search when you return to the village later.

12. Create a map and outfit it. A map in the console version of Minecraft enables you to view your current location.

13. Make your way to the settlement. Walk toward the settlement with the map in hand. You should be near the settlement once the x- and z-coordinates coincide.

  • Because the ChunkBase Village Finder is not perfect, you may find yourself near (but not in) a village. If you can’t locate the settlement right away, look about the region.
  • Ignore the y-coordinate for the time being; once you reach the village’s x- and z-coordinate junction, you’ll know whether you need to go up or down.

Finding Villages Organically

1. Recognize that locating a community may take many hours. Even in tiny worlds, locating a single town among tens of thousands of blocks is like to locating a needle in a haystack.

2. Understand where to look. Villages may be found in the biomes Desert, Savanna, Taiga (including cold variations of Taiga), and Plains (including frozen plains). Don’t spend your time hunting for communities if you find yourself in a Jungle, Mushroom, Tundra, or other biome that isn’t supported.

3. Understand what to look for. Villages are often constructed of wood planks and cobblestone, and they stand out from their surroundings.

4. Prepare yourself for a long voyage. It may take hours to discover a hamlet, so prepare by gathering basic tools, a bed, food, and weapons. It’s preferable to move during the day and camp at night, so dig yourself a hold and seal it most of the way to keep gangs out.
To prevent suffocation, you must leave at least one block open.

  How to Protect Small Dogs from Birds of Prey

5. Tame a mount to use as a mode of transportation. You can use a saddle to gain a horse and speed up your exploration if you have one. Find a horse and interact with it with an empty hand multiple times until it doesn’t throw you off, then sneak up to the tamed horse and choose it with the saddle to make it manageable while riding.

6. Find a point of view. Navigate to the highest hill in a biome where communities may be found. This allows you to take in more of your surroundings, making it simpler to recognize man-made buildings.

7. At night, look for torches. Fire will be considerably more visible at night than during the day. While fire at night may be lava, there’s a significant likelihood it’s coming from torches—and torches are often associated with communities.
If you’re playing survivor mode on any level other than “peaceful,” be exceedingly cautious. Due of mobs, it’s advisable to wait until the next day to explore the torches.

8. Continue your exploration. Villages are completely random, and there is no way to discover one without utilizing third-party technologies. Take the time to investigate each matching biome you come across for the greatest possibility of discovering a settlement.

How do you find the village world in Minecraft?

Take a look at these guidelines:
Visit the webpage of the Minecraft Village Finder.
Enter “/world seed” to get the seed of your current world.
In the Minecraft Village Finder, enter the seed.
The chart will alter, and you will be able to determine the coordinates for the nearest Village to you.
Begin your journey to the Village.

How do I find a village in Minecraft without cheating?

On console versions of Minecraft, you can’t use commands to discover a village and then teleport to it, therefore you’ll need to find the seed code for a world and then put it into a village finder online to find the location of a village.

What is the fastest way to find a village in Minecraft?

To get the coordinates of the closest village, use the chat command and type ‘/locate Village’ and press enter.

What coordinates are villages in Minecraft?

The settlements’ locations are as follows: 578, -321 for the first, 75, -297 for the second with a destroyed Nether gateway and ravine, and 930, -277 for the third in spruce. Enjoy plundering and constructing your own Minecraft survival fortress!

Are abandoned villages rare in Minecraft?

In Minecraft, abandoned towns (also known as zombie villages) are uncommon. These communities are totally run-down and deserted, with all prior residents transformed into zombie villagers. These settlements were most likely overtaken by zombies, transforming a once thriving metropolis into a bleak wasteland.

Can you start a village in Minecraft?

There is no right or wrong method to build your own town as long as your homes include beds for inhabitants to sleep in. You may construct your buildings out of whatever materials you choose, decorate them anyway you want, and create as many structures as you want.

Similar Posts