How to Fit a Steering Wheel Cover

How to get a steering wheel cover on

How to put on a steering wheel cover – Steering wheel covers are an inexpensive and simple method to personalize your steering wheel. Some coverings may be stretched over the wheel and are completely self-contained, but others must be sewn together to fit properly. To add a steering wheel cover to your car, you must first measure your wheel and then buy the appropriate size cover. Once you’ve found the correct cover for your car, you’ll either have to stretch it over the wheel or sew it together using a needle and thread.

You are viewing article How to Fit a Steering Wheel Cover at website answerforyou.net in category Tips.

1. Measuring and Getting Ready for Your Steering Wheel Cover

1. Isopropyl alcohol should be used to clean the steering wheel cover. Wipe off the steering wheel with a towel and some isopropyl alcohol before applying the cover. This will get rid of any dirt or dust that was previously trapped behind the steering wheel cover.

2. The diameter of the steering wheel should be measured. Stretch a tape measure over the front of your steering wheel, from one side to the other, to determine its diameter. The majority of steering wheels have a diameter of 14–17.5 inches (36–44 cm).

• The diameter and grip thickness of most covers are included in the product description.

3. Take a measurement of the thickness of your steering wheel’s grip. To assess the thickness of the steering wheel grip, wrap the tape measure around it. Purchase a steering wheel cover that fits your steering wheel’s specifications.

• The majority of grips are 2–4.5 inches (5.1–11.4 cm) thick.

4. A cover may be purchased at an automobile shop or online. Find a steering wheel cover that fits the dimensions of your steering wheel. Stretch type covers will fit perfectly over your wheel, however stitch style covers will need you to put them together. When it comes to picking a cover, you have a wide range of colors, styles, and patterns to choose from.

• Find a steering wheel cover that complements the look of your vehicle. Consider obtaining a black leather steering wheel cover if your interior is black leather.

5. If there is any cardboard wrapping, remove it. Many steering wheel covers have cardboard in the middle of the cover. Before fitting the cover, remove the cardboard and any other tags.

• Most steering wheel coverings will come with instructions on the back of the cardboard container.

6. To soften stretch type covers, use a blow dryer. Plug in a blow dryer and set it to high heat. 1 inch (2.5 cm) away from the inside of the steering wheel cover, hold the blow dryer. For 5-10 seconds, keep the heat on each part of the cover. This should make it more pliable and less difficult to install.

• Do not allow the cover to cool. Begin the installation procedure as soon as you have heated it.
• Most stitch-required steering wheel coverings are designed to fit loosely, so if you’re using one, you may skip this step.
• Plug the hair drier into an outside outlet to maintain the cover as bendable as possible.

2. Installing a Stretch Style Steering Wheel Cover

1. Place the cover’s top over the top of the wheel. Before you begin installing the cover, center the wheel. Slide the top of the steering wheel cover over the top of the wheel as far as it will go.

• Place the cover so that the seam is over the bottom of the wheel.

2. Stretch out both edges of the cover so that it fits over the wheel. Stretch the cover over one side using your fingertips. Then, go to the other side and extend that side over. Work your way down the wheel in small increments until the whole cover is secured.

• It may be necessary to exert considerable force on the cover in order for it to extend over the wheel.’

3. Pull the cover’s bottom over the wheel. After you’ve moved the cover as far as you can, you’ll most likely encounter resistance around the bottom of the wheel. Use all of your might to get the last component of the cover to fit snugly over the wheel. You’ve successfully fitted your steering wheel cover after it’s been fitted over the bottom.

• If you’re having difficulties putting the cover on, ask a buddy to hold the wheel straight.
• Take the cover off your wheel and repeat the procedure to realign it.

3. Sewing a Steering Wheel Cover

1. Wrap the steering wheel cover around the wheel. First, center the wheel. Then, lay the cover over the wheel, making that the side flaps line up with the spokes. Some covers include adhesive tape that you may use to fasten the cover to the wheel.

• The majority of stitched steering wheel covers will fit loosely around the wheel.
• If the steering wheel cover does not fit over the wheel, you have ordered the incorrect size.

2. Lacing string is used to thread the needle. Lacing string is included with most stitch-required steering wheel coverings. Lace 1 end of the string through the eye of the needle and cut 3–5 feet (0.91–1.52 m) of string. To complete threading the needle, tie a knot at the end of the string.

• Lacing string may be purchased at an arts and crafts shop or online if your cover did not come with it.
• Lacing string is strong and will last a long time.

3. Insert the needle into the interior of the cover. Begin stitching towards the top of one of your steering wheel’s spokes. Insert the needle into an existing stitching hole on the inside of the cover on the furthest side from you. Pull the needle so that the thread goes all the way through and comes to a halt at the knot.

• Many covers will already have stitching holes, which you should utilize instead of making new ones.

4. Insert the needle into the side of the cover that is closest to you. Pull the string tight, stretching it over the wheel, using the needle and thread. Run the needle through the outside of the cover, on the side nearest to you. Pull the needle tight to bring the cover’s two sides closer together.

• The string should be wrapped around the steering wheel, not the steering wheel cover.
• The closer you can get both sides of the cover to each other, the more secure and tidy your cover will seem.

5. Twist the inner thread around the needle and tighten it. Wrap the yarn that connects both sides of the cover 3-4 times around the needle before pulling it tight. After twisting the thread around the needle, pull it tight and bring the two sides of the cover as near together as possible.

• This will knot the thread and hold it in place while you continue to thread the remainder of the cover.

6. Thread the needle through the cover’s threads. Insert the needle through the pre-sewn thread in the cover’s seam. Begin with the side farthest away from you, then pass the needle beneath the thread on the closest side to you and pull it tight. To stitch the steering wheel cover together, continue this technique back and forth.

• The needle does not need to go through the cover; it just has to join the current stitching on both sides.
• If you perform it right, you should end up with a criss-cross pattern.

7. When you reach another spoke, tie a knot at the end of the thread. When you reach a spoke, pull the thread tight, tie a knot, and cut the extra string. If you followed all of the steps properly, your stitching should be crisp and consistent.

8. Complete the remainder of the cover’s sewing. Continue stitching the cover in the same manner until the whole cover is sewn. Attaching a sewn-on steering wheel cover may be time-consuming and detail-oriented, and can take many hours.

What’s the easiest way to put on a steering wheel cover?

Stretch out both sides so that the cover fits over the wheel. Use your fingers and stretch the cover over one side. Then, alternate to the other side and stretch that side over. Work your way incrementally down the wheel until the entire cover is attached.

Why are steering wheel covers so hard to put on?

Don’t get frustrated; installing steering wheel covers can be difficult if the cover is not stretchy enough to fit over the wheel easily.

Do all steering wheel covers fit?

Not all steering wheel covers are the same. So you will need to measure your steering wheel before you purchase a steering wheel cover. The majority of the steering wheels are 14–17.5 inches (36–44 cm) in diameter. The individual covers will list the diameter and the thickness of the grip in the product details.

Do steering wheel covers ruin your steering wheel?

Steering wheel covers are made to prevent damage to the steering wheel. However, steering wheel covers sometimes pose a greater risk to the steering wheel and the vehicle’s safety if made from poor quality materials.

What do you do if your steering wheel cover is too big?

You’ll need to be creative. If it’s too big then you’ll have to cut off a portion and reattach the ends, so that it will fit your steering wheel.

Can you put a steering wheel cover on a heated steering wheel?

You also have to remember that by putting a cover over it it will take awhile for the heat to transfer to the new layer and you may not notice the heat very well. Typically the heated steering wheels are on a timer as a protection from over heating. So you’ll need to be careful.

Do steering wheel covers slip?

Steering wheel covers

At best, it’s an ill-advised statement of personal taste, but depending on how bad your steering wheel cover is (and none of them are good), it can be downright unsafe, leading to slippage in crucial moments.

Can a 15 inch steering wheel cover fit a 14 inch steering wheel?

Yes, it fit perfectly. This will fit steering wheels that are 14-1/2 to 15 in diameter. Me… Q: Is this true white or off-white like eggshell?

What size is a car steering wheel?

A steering wheel for everyday use will usually have a diameter of about 14 to 15 inches. However, the steering wheel usually has a diameter of about 12.6 to 13.8 inches for racing cars. This size is also very intended for cars that take part in racing competitions.

Are all steering wheels universal?

A simple answer is NO, steering wheels are not universal. Steering wheels from different car manufacturers differ in terms of size, the diameter of the shaft, fitting of the airbag, and the number of splines. There is also a big difference in steering column construction and the main bolt that holds the wheel.

Can you put a steering wheel cover in the dryer?

Plug in a blow dryer and turn it on high. Hold the blow dryer 1 inch (2.5 cm) away from the interior of the steering wheel cover. Keep the heat on each section of the cover for 5-10 seconds. This should make it more pliable and easier to install.

Are fluffy steering wheel covers illegal?

Answer: Steering wheel covers are legal. A quick reminder though: It’s always the driver’s responsibility to keep control of the vehicle at all times, even if the steering wheel cover becomes loose.

Is it safe to drive with steering wheel cover?

A steering wheel cover has a negative impact on driving when it is of low quality. For example, if the material is slippery, or if it gets damaged quickly after some usage, it may cause disruptions for the driver especially when doing maneuvers. This can get dangerous if the driver loses control of the wheel.

Related searches

how to put on a steering wheel cover | steering wheel cover lace up | 16 inch wheel covers | steering wheel wrap tape | how to make a steering wheel cover fit tighter | 15 in wheel covers | how to put on a tight steering wheel cover | 17.5 inch steering wheel cover | how to stretch a steering wheel cover | how to make steering wheel cover tighter | black 15 inch wheel covers | how to measure steering wheel cover | 15 inch wheel covers | how to put a steering wheel cover on | 44cm to inches | how to measure for steering wheel cover | how to stretch steering wheel cover | 15 wheel cover | how to put on tight steering wheel cover | wheel tie down net | wheel covers 16 | lace up steering wheel cover | 16 inch wheel cover | wheel covers 15 inch | black wheel covers | 17.5 cm to inches | 44cm in inches | how to measure steering wheel | fitted car covers | steering wheel covers leather | how to put on steering wheel covers | how to put steering wheel cover on | steering wheel cover | fitted steering wheel covers | leather steering wheel cover | wheel dryer | how to measure steering wheel for cover | how to measure for a steering wheel cover | can you shrink a steering wheel cover | 16 in wheel covers | how to fit wheel covers | wheel covers 16 inch black | 16″ wheel covers | how to measure wheel covers | 15 rim covers | 15 black wheel covers | 14 inch black wheel covers | 16 wheel covers | 16 wheel cover | tie on steering wheel covers |