How to Hang Garland on Brick Update 2023

How to hang garland on brick

How to hang garland on brick – Garlands are available in a number of forms and make fantastic Christmas decorations. There are various approaches you might use if you wish to put garland on a brick wall. If you have equally spaced bricks and don’t want to harm your wall, connect your garland with brick clips to elevated bricks. If the wall has varied sizes of bricks but you still don’t want to drill holes, you may hang garland on brick using sticky hooks. You may always add wall anchors and screws in the mortar between your bricks to hang garland if you don’t mind drilling.

You are viewing article How to Hang Garland on Brick at website answerforyou.net in category Tips.

Using Adhesive Hooks

1. Purchase some sticky hooks meant for brickwork. Adhesive hooks, sometimes known as command strips, are plastic strips with hooks on the back and a strong adhesive on the front. Most sticky hooks are meant to handle less than 20 pounds (9.1 kg), so if you’re hanging a hefty or huge garland, purchase some heavy-duty clips. To verify that the adhesive on the back of a box will work with brick, carefully read the label.

If you don’t want to drill into brick but can’t locate brick clips that fit your brick design, adhesive hooks are the best solution.
Buy some sticky hooks at your local hardware or large box shop. They are also available for purchase online.

Tip: Some sticky hooks aren't meant to be removed. If you want to leave a garland up for an extended amount of time, invest on permanent hooks.

how to hang garland on wall — With a pencil, mark the spots where you wish to hang your hooks.

2. With a pencil, mark the spots where you wish to hang your hooks. At least one hook should be placed for every 2–6 feet (0.61–1.83 m) of garland. If you want a symmetrical design, use a measuring tape to space out each hook evenly by measuring the same distance between each of your hooks. By inspecting the air bubble in the level, you may establish whether a place is even by holding a level between possible hooks. With a pencil, mark the position of each hook.
Each sticky hook has a variable weight threshold, which is generally between 2–30 pounds (0.91–13.61 kg). The greater the weight threshold for a set of hooks, the more apart they may be placed.

how to hang on brick — Remove the glue from the back of the strip and place it on your brick.

3. Remove the glue from the back of the strip and place it on your brick. Peel the cover for the adhesive tape on the back of each hook using your fingernail for each area you’ve marked out. Position the hook against the brick and carefully drop it against the wall.

The tape cover should come off easily, but if it doesn’t, use a tiny knife to pry the corner apart.
You may be able to adjust the hook if you misplaced it but haven’t pushed down yet.

how to hang garland — To secure a strip, apply pressure to the front of it.

4. To secure a strip, apply pressure to the front of it. After you’ve positioned a hook, put both hands on the opposite ends of the hook, one on top and one on the bottom. To attach the hook to the block, apply equal, hard pressure into it for 5-10 seconds.

hang garland on brick — To hang the garland, thread it through the hooks.

5. To hang the garland, thread it through the hooks. Wrap the garland’s center branch or thread around each adhesive hook. Begin in the center so you may alter each side to make it equal. If you need to remove or alter any of the hooks, you may either pull on the tab at the bottom of the hook or pry it off from the bottom with a dull knife.

To remove certain hooks, tiny pieces that protrude out of the bottom are provided. To remove a hook, pull this strip straight down.
If there isn’t a removal strip connected to the hook, get leverage beneath it with a flat, dull kitchen or putty knife. Pry it up 1-2 millimeters, then take the hook off.

Hanging a Garland with Brick Clips

hanging garland on brick — Check the mortar on your brick wall to ensure that it is recessed.

1. Check the mortar on your brick wall to ensure that it is recessed. Hang clips around the bricks to hang your garland if the bricks on your wall protrude at least 14 in (0.64 cm) beyond the mortar. Brick clips hook around the top and bottom edges of a brick and depend on the weight of the brick to hold the clip in place. However, if the mortar is flat with the bricks, there will be insufficient space to hang the clips.

Brick clips are a great alternative if you don’t want to drill into the mortar or apply glue directly to the brick.
Brick clips may only be used to hang a garland horizontally if your bricks are arranged in even rows.

how to attach garland to brick — Purchase a set of clips that corresponds to the size of your bricks.

2. Purchase a set of clips that corresponds to the size of your bricks. Calculate the height of a brick on the wall where you want to place or hang the garland. Brick clips may be purchased from a local hardware shop or an internet vendor. They come in various sizes, so carefully check the label on a box to confirm that the clips are suited for bricks of the same size as the bricks in your wall.
Brick clips can normally be modified to suit a range of 0.2 inches (0.51 cm) in each direction, thus if your brick is 3 inches (7.6 cm) tall, you can probably use brick clips meant for bricks that are 2.8–3.2 inches (7.1–8.1 cm) tall.

adhesive hooks — Place the clip’s top flat on the top of the block.

3. Place the clip’s top flat on the top of the block. Hold the brick clip slightly above the brick to which it is attached and slide it down so that the top of the clip is on top of the brick. Slide the bottom of the clip beneath the bottom of the brick after the top of the clip is hanging on the top of a brick. The majority of brick clips will snap into position underneath the brick. Install each brick clip so that the hook on the clip’s face faces up.

If you don’t like where a brick clip is, you can easily relocate it. Pull the bottom down while dragging it off of a block to pop it off.
To reach bricks that are high off the ground, use a sturdy ladder.

hang on brick — 1 clip should be placed every 2–6 feet (0.61–1.83 m) of garland.

4. 1 clip should be placed every 2–6 feet (0.61–1.83 m) of garland. You are free to arrange your hooks anyway you see fit. Place two symmetrical hooks above the chandelier or door if you’re hanging the garland around a door or fireplace. Place all of your clips along the same row of bricks if you’re hanging the garland horizontally. The amount of spacing between clips determines the number of dips in your garland.
For example, if you use three brick clips, the garland on the wall where you’re placing it will have three different dips. The more clips you use, the less noticeable the dips become.

how to hang a garland on brick — To hang the garland, thread the string or branch through the hooks.

5. To hang the garland, thread the string or branch through the hooks. Begin with the centermost hook and thread the garland through the brick clip’s hook. Adjust the length dangling off either side when it is hanging on the centermost hook by gently tugging on each end to make the garland center. If the hooks on the brick clips are too large for your garland’s string, leave 2–4 feet (0.61–1.22 m) of garland dangling off both ends of each clip. The weight of the garland will hold the remaining string or branch in place.

Drilling Masonry Screws or Hooks into Mortar

adhesive hooks for brick — With a pencil, mark each screw placement in the mortar of your brick wall.

1. With a pencil, mark each screw placement in the mortar of your brick wall. If you want your hooks or screws to be symmetrical, mark them at equal intervals using a measuring tape. If you want to hang your garland with hooks, make sure that each screw point is on the same horizontal plane by using a level to confirm that each gap is uniform and flat. Any kind of pencil may be used to indicate the position of each screw.

brick adhesive hooks — Get some wall anchors, hooks, and screws.

2. Get some wall anchors, hooks, and screws. Hooks, anchors, and screws may be purchased at a local hardware shop or online. Select hooks or screws that will fit between your bricks without interfering with them. In most circumstances, a 14 inch (0.64 cm) head screw will enough. Screws and hooks should be able to penetrate the mortar at least 12 inches (3.8 cm).

Check the threading of your screw before purchasing a box of wall anchors. However, most wall anchors will accept a variety of screws.
You don’t need to use wall anchors if your garland weighs less than 3 pounds (1.4 kg). Unless your garland is heavier over 30 pounds (14 kg), any plastic wall anchor that fits your screw will suffice.
Hooks are preferable for garlands made of thicker leaves or tinsel.

sticky wall hooks — To capture dust, use a drop cloth on the floor or over furniture.

3. To capture dust, use a drop cloth on the floor or over furniture. Set up a drop cloth along the wall where you want to drill before you begin drilling. If there is any furniture against the wall, you may either move it or cover it. Drilling into masonry can cause dust to fly everywhere, and cleaning it up might be difficult if you don’t have a drop cloth.

Warning: Take care not to drill straight through your brick. You risk fracturing the brick, and mortar is simpler to fill in if you need to fix your holes in the future. When drilling into masonry, always use safety glasses, a dust mask, and gloves. The dust might irritate the lungs and eyes.

sticky hooks — Drill pilot holes for the wall anchors into the mortar.

4. Drill pilot holes for the wall anchors into the mortar. Hold a masonry drill bit up to the length of your wall anchor until you find one that is at least 132 inch (0.079 cm) thinner. Unscrew the bolt at the top of the drill and slide the drill bit into place. Drill a pilot hole in each area where you wish to put a screw or hook that is at least half the length of the wall anchor.
A pilot hole is any incision made to allow a screw or fixture to be put in more readily.

command strips — Screw your wall anchors into the pilot holes you made earlier.

5. Screw your wall anchors into the pilot holes you made earlier. Screw each wall anchor into a pilot hole with a screwdriver or drill with a matched drill bit. Drill each wall anchor into the mortar so that it is level with the surface.
If you choose, you may use a can of compressed air to clear away any mortar dust. This will avoid dust particles from accumulating on the anchors over time.

how to use brick clips — Screw or hook your screws or hooks into the wall anchors.

6. Screw or hook your screws or hooks into the wall anchors. Drill your screws into the wall anchors so that they protrude 1–3 inches (2.5–7.6 cm). Install hooks by hand, screwing the threaded side into the wall anchor until the threading is concealed in the wall. Rotate the open end of each hook so that it is pointing up towards the ceiling.

how do brick clips work — Screw or hook your screws or hooks into the wall anchors.

6. Screw or hook your screws or hooks into the wall anchors. Begin on the centermost hook so that you can equal out the length on both sides. If you’re using hooks to hang the garland, pass the center of the garland through the center of each hook. Balance the garland’s rope over the screw where it touches the wall if you’re hanging it over the screws. If the garland’s string has loops, you may wrap them around each screw and then drill the screws all the way through to cover the anchors.

If your garland is falling off a hook, try winding it around the hook or taping a leaf or branch to the top of the screw. Garlands aren’t normally heavy, so it won’t require much tape to hold the garland in place.
You can always fill up gaps in the mortar by combining water and mortar in a bucket or tray and applying it with a trowel.

How do you hang garland on brick without drilling?

Adhesive hooks are the best option if you don’t want to drill into brick but you can’t find brick clips that match your brick pattern. Purchase some adhesive hooks from your local hardware or big box store. They can also be purchased online.

How do you hang things on a brick wall without drilling?

A: Devices called brick clips or brick hangers allow people to hang pictures, mirrors and other objects on walls without drilling into the brick. Two examples are Brick Clips by a company called Tuopu (10 for $14.99 on Amazon) and OOK Brick Hangers (two for $2.48 at Home Depot).

How do you hang garland on an outdoor stone?

Use brick clips to hang garland if you have brick or stone with recessed mortar. Brick clips are metal clips that hook into the gaps between bricks or stones where the mortar is. They work well for hanging garland on a brick fireplace or mantel or an exterior stone brick wall, for example.

How do you hang garland without nails?

How To Hang Wreaths & Garland Without Nails
Adhesive Hooks. A great tool for hanging both wreaths and garland are adhesive hooks like Command Strips. …
Over The Door Wreath Hangers. Christmas wreaths are a great way to welcome your guests into your home. …
Twisty Gear Ties. …
Decorative Ribbon. …
Garland Hangers.

Will command strips stick to painted brick?

Will Command™ Products stick to brick? No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).

Do Command Strips work on painted brick?

Do command hooks work on brick walls? Command stips only work on bricks if the brick is painted, and not too rough. Think more on the lines of painted concrete block, much smoother, rather than a rougher brick. The issue is the surface area the adhesive has to have enough flat smooth surface to grip onto.

How do you hang over painted brick?

Once you choose your artwork, here’s a step-by-step guide on how to hang things safely and securely on brick.
Mark the location on the wall where your holes will go. …
Drill into your marked locations. …
Hammer your anchors in. …
Drill your screws into the anchor. …
Hang your art and make sure it’s level.

Does Gorilla Tape work on brick?

Gorilla tape sticks to smooth, rough and uneven surfaces, including wood, stone, stucco, brick, metal and vinyl. Gorilla Tape, for the Toughest Jobs on Planet Earth®.

What adhesive will stick to brick?

There are only a couple of glues that are rated strong enough to use with brick: Gorilla Glue and Rhino Glue.

How do you hang decorations on brick?

If you need to hang heavy objects or ensure the object is secure on the wall, use screw-in anchor hooks. All you have to do is pre-drill holes into the mortar or brick, then screw in the anchor hook. You can also use anchors that stick to or clamp to the wall, but these are best for light objects only.

What do you hang garland with outside?

Hot glue is one of the easiest ways to temporarily attach a string of lights or garland to the outside of your home.

How do you attach garland to exterior?

You can hang garland on exterior door in a variety of ways. The most well-known and common options are sticking with adhesive tape, hanging and fastening with nails or thumbtacks.

How do you secure a wall garland

Command Hooks. Command hooks are really the best thing I’ve found for hanging wreaths, garland and stockings on my mantel, door, or wall, without nails! If you haven’t used them yet, they are little hooks with a non-damaging adhesive double sided tape on the back.

Can you use 3M strips on brick?

Do Command Strips work on masonry?

They’re waterproof and oil-proof, so you can use them to hang items in your bathroom and in your kitchen. They’re also easy to install — all you need is a clean wall and a hair-dryer! The unfortunate downside is that they don’t work on brick, wallpaper, or other similarly textured surfaces.

Do brick clips work?

The clip which holds onto the mortar area

The brick clip holding it inside the mortar area will work with any kind of brick, so there’s no worry about having to measure the bricks prior to buying them.

How to Hang Garland on Brick