how to tie converse high tops

How to Lace Converse

Rate this post

How to tie converse high tops

Converse sneakers may give your outfit a fashionable, new style, and they’re suitable for practically any event. Lacing your Converse, on the other hand, may be a difficult chore, particularly if you’re trying out a new lace design. While none of the techniques below are very difficult, they serve as a good starting point for learning the fundamentals of lacing. Impress your buddies by experimenting with a few different methods to lace your Converse.

Criss-Cross Shoelace Pattern

how to tie converse high tops #1
Straighten the shoelace across the bottom pair of eyelets

1. Straighten the shoelace across the bottom pair of eyelets. Bring both ends of the lace up through the lowest pair of eyelets on the Converse’s underside. A horizontal bar connecting the two bottom eyelets should be straight. To make your laces seem symmetrical in the end, make each end as equal as possible.

  • Because it is both easy and comfortable, this is the most used lacing system for all sorts of shoes.
how to tie converse high tops #2
“Side A” should be threaded up and across

2. “Side A” should be threaded up and across. Pull “Side A” through the left bottom eyelet and into the right eyelet second from the bottom on the left side of the shoe. This forms a diagonal line between the two eyelets. From the underside of the eyelet, draw the shoelace over the left bottom hole and push it through the second-to-bottom hole on the right. Pull the lace through the right eyelet, bringing it out and back over the top.

how to tie converse high tops #3
“Side B” should be threaded up and across

3. “Side B” should be threaded up and across. Pull “Side B” through the right bottom eyelet and into the left eyelet second from the bottom on the right side of the shoe. This should create a new diagonal line between the two eyelets. Pull the shoelace over the right bottom eyelet, but from the underside, push it through the second-to-bottom eyelet on the left. Pull the lace end through the left eyelet until it pokes through and falls back over the top.

how to tie converse high tops #4
Back and forth, cross the two sides

4. Back and forth, cross the two sides. Continue crisscrossing the two laces and alternating “Side A” and “Side B” until you reach the top set of eyelets. Pull each end through its eyelet and lace it into the eyelet one row up on the other side.

  • Don’t overtighten the laces if you want your shoes to fit loosely. Instead, as you go higher, leave a little slack.
how to tie converse high tops #5
At the top set of eyelets, pull the two ends together

5. At the top set of eyelets, pull the two ends together. Another horizontal route, identical to the one at the bottom, should be created as a result of this. To keep your feet in your shoes, tie the two laces together in a bow. You’re all set to go!

  • If you don’t want the laces to show, you may tuck them below the shoe’s cushion.
  How to Have Fun With Your Cousin for a Week

Straight Bar Lacing

how to tie converse high tops #6
Bring up “Side A.”

1. Bring up “Side A.” The shoelace on the left side of the shoe, known as “Side A,” should be drawn through the second from the bottom left eyelet. If you’re using flat laces, remember to prevent the shoelace from curling up.

how to tie converse high tops #7
“Side A” should be threaded all the way across

2. “Side A” should be threaded all the way across. Pull the shoelace over the front of your shoe and through the right hole, which is exactly across from the hole you pulled it through. A horizontal bar should run across the front of your shoe. This side’s end should be tucked back under the side of your Converse.

how to tie converse high tops #8
By skipping one pair of eyelets, bring “Side B” up

3. By skipping one pair of eyelets, bring “Side B” up. “Side A” should occupy the hole second from the bottom. Remember not to curl the lace, particularly if they are flat laces.

  • If the lace begins to curl, continue to rub your hands over it until it is flat again.
how to tie converse high tops #9
“Side B” should be threaded all the way across

4. “Side B” should be threaded all the way across. Pull the shoelace end across the front of the shoe and lace it into the third from the bottom left eyelet, right opposite the eyelet you pulled through. This should result in a new horizontal bar across the front of your shoe, with the end concealed from view.

how to tie converse high tops #10
In this design, the eyelets are alternated with lace

5. In this design, the eyelets are alternated with lace. Lace “side A” through the second, fourth, and sixth eyelet pairs from the bottom. Lace “side B” through the third, fifth, and seventh eyelet pairs from the bottom. You should now have a column of horizontal bars with no diagonals below.

  • Keep those laces flat at all times!
how to tie converse high tops #11
Pull the ends together and bind them together

6. Pull the ends together and bind them together. At the top pair, pull “Side A” through the right eyelet and “Side B” through the left eyelet. To finish your outfit, tie them together with a regular shoelace bow.

  • You may also tuck your laces under the cushion of your shoe to prevent them from hanging out the top.

Double-Sided Lace Pattern

how to tie converse high tops #12
Depending on the number of eyelets on your shoes, choose the appropriate shoelaces

1. Depending on the number of eyelets on your shoes, choose the appropriate shoelaces. For this lacing method, you’ll need two different shoelaces in different colors, but they must be the same length. Use flat, thin shoelaces to ensure that both laces pass through each eyelet. This approach will appear best on Converse with an odd number of eyelet paris, but it will look best on shoes with an even number of pairs.

  • Choose a shoelace that is 28 inches (71 cm) long if you are utilizing two sets of eyelets.
  • Choose shoelaces that are 32 inches (81 cm) long if you’re utilizing three pairs of eyelets.
  • Choose shoelaces that are 36 inches (92 cm) length if you’re utilizing four pairs of eyelets.
  • Use shoelaces that are 40 inches (102 cm) long if you’re utilizing 5 pairs of eyelets.
  • Use shoelaces that are 44 inches (113 cm) long if you’re utilizing 6 pairs of eyelets.
  • Use shoelaces that are 48 inches (123 cm) long if you’re utilizing 7 pairs of eyelets.
  • Choose laces that are 53 inches (134 cm) length if you’re utilizing 8 pairs of eyelets.
how to tie converse high tops #13
Hold the two shoelaces together with your hands

2. Hold the two shoelaces together with your hands. Arrange the two shoelaces so that they are back-to-back and equally lined up. Check that the laces are even and flat, and that they’re the same length.

  • This approach is similar to the criss-cross method, but it’s a little more difficult to get tight.
how to tie converse high tops #14
Thread the laces through the eyelets on the bottom

3. Thread the laces through the eyelets on the bottom. Pull the double-laces through the bottom eyelets until “Color One” is visible. “Color Two,” the second lace, will be covered below the top lace. From the bottom, thread the shoelaces through the eyelets so that the ends come up through the eyelets.

  • When you’re through with this step, the laces will drape over the sides of the shoes.
how to tie converse high tops #15
“Side A” should be crossed diagonally upward

4. “Side A” should be crossed diagonally upward. Pull “Side A” through the second-to-bottom right eyelet from the bottom left eyelet. Make sure the shoelaces are twisted in such a way that “Color Two” is on top and “Color One” is buried at the bottom. On opposite sides of the Converse, a diagonal line should link the bottom and second-to-bottom holes. Pull the laces over the top of the right second-to-bottom hole from the underside.

how to tie converse high tops #16
“Side B” should be crossed diagonally upward

5. “Side B” should be crossed diagonally upward. Pull “Side B” through the second-to-bottom left eyelet from the bottom right eyelet. To complete the criss-cross, twist the shoelaces to match the opposite side of the criss-cross. On the top, “Color Two” should be visible, while “Color One” should be buried at the bottom. A diagonal line should link the two eyelets. Pull the shoelaces through the left eyelet from the underneath, allowing them to droop over the top.

how to tie converse high tops #17
Turn the shoelaces over to the other side

6. Turn the shoelaces over to the other side. Repeat the criss-crossing pattern, but twist the shoelaces so that Color One is on top and Color Two is on the bottom. Switch back and forth between “Side A” and “Side B,” crisscrossing the eyelets so that each end is drawn through its eyelet and into the adjacent side’s eyelet one row above.

  • When you twist your shoes, you’ll get a short burst of color in the centre.
how to tie converse high tops #18
Twist and cross your way to the summit

7. Twist and cross your way to the summit. Continue crisscrossing and twisting the shoelaces. Each “x” across your shoes should be made up of a single hue, however it should be the polar opposite of the “x” under and above it.

how to tie converse high tops #19
Tie the laces together after pulling them through the top

8. Tie the laces together after pulling them through the top. It doesn’t matter which side of the double-lace shows when you draw the shoelaces through the top set of eyelets since both sides will show when you tie your shoes. Alternatively, tuck one color shoelace into the top of your shoe and merely tie the other color in the front of your shoe to make tying the shoes simpler. Otherwise, both laces will be used to tie your shoes.

  • Leave the laces in the eyelets when you untie your shoes to retain the alternate pattern.
  How to Tie Dye a Shirt Using Kool Aid

Bar Lacing

how to tie converse high tops #20
Unlace your shoes’ top two eyelets

1. Unlace your shoes’ top two eyelets. If you already have your shoes tied in a criss-cross pattern, you may attempt bar lacing. To begin, unlace the top two eyelets and let the laces to fall to either side of your shoe.

  • This technique may be used with other types of lacing, such as the straight bar, but it works best with the criss-cross.
how to tie converse high tops #21
Pull the outer lace through the first side hole and across the tongue

2. Pull the outer lace through the first side hole and across the tongue. Take the lace on the outside of your shoe, or the lace farthest away from the side holes. So that it sticks out of your shoe, cross that lace over the tongue and into the side hole closest to the toe.

how to tie converse high tops #22
Using the same lace, thread it through the second side hole

3. Using the same lace, thread it through the second side hole. Take the lace from the side of your shoe and thread it through the second side hole. Then, from the inside of your shoe, grasp it and pull it taut.

  • Lacing your Converse through the side hole might actually make them tighter and more comfortable.
how to tie converse high tops #23
Reverse the laces through the top eyelets

4. Reverse the laces through the top eyelets. Grab both laces and re-tie them through the top two eyelets of your shoe, as you did before. They could seem a little uneven at first, but you can correct them in a flash.

  • To avoid rubbing your foot while you walk, keep the lace poking through the side of your shoe as near to the tongue as feasible.
how to tie converse high tops #24
Remove your shoes and re-tie them

5. Remove your shoes and re-tie them. By tying up your shoes and examining how they fit, you may test out your new lacing technique. If necessary, you may tighten or relax the fit by pulling the lacing through the side hole of your shoes.

  • If your shoes are floppy, this is a terrific hack!
  How to Mount Bindings to a Snowboard

Similar Posts