How to make fake earrings

How to Make Fake Earrings

Rate this post

How to make fake earrings

Have you ever wanted to wear earrings for a costume or for fun but couldn’t because your ears weren’t pierced? Fortunately for you, manufacturing earrings is a simple process. Once you’ve mastered the fundamentals, you may create a wide range of earrings to wear.

Making Fake Hoop Earrings

How to make fake earrings #1
Purchase a notepad with metal rings.

1. Purchase a notepad with metal rings. If you can’t locate a notebook, go to a bead or art store and grab some 20 to 24 gauge metal wire. You may make it whatever color you like. Formalized paraphrase

How to make fake earrings #2
Snip a loop off using a pair of wire cutters.

2. Snip a loop off using a pair of wire cutters. Snip another loop off if you want to create two earrings. You will have one (or two) metal rings at the end. Make careful to remove the “hook” from the end of your metal ring as well.
If you’re using metal wire, use wire cutters to remove around 1 to 2 inches (2.54 to 5.08 cm). To form it, wrap it around a pen or marker. Avoid using scissors as they will get dull.

How to make fake earrings #3
Consider threading a nice bead through the wire.

3. Consider threading a nice bead through the wire. Add a little bead on each side of the bigger one for a nicer earring.
Instead of a dangler, use a pendant or charm from a necklace or bracelet.

How to make fake earrings #4
Twist each end of the wire inward with a pair of round nose pliers.

4. Twist each end of the wire inward with a pair of round nose pliers. With the pliers, pinch the cut end of the wire and fold it inside. This will soften and make the earring more pleasant to wear. If you put any embellishments to your earring, these loops will protect them from coming off.

How to make fake earrings #5
If necessary, reshape the earring.

5. If necessary, reshape the earring. Curve the earring back into a ring form with your fingers or a pen. Maintain a tiny space between the two folded loops.

How to make fake earrings #6
Put on the earring.

6. Put on the earring. Pull the earring apart until the gap section can be slipped onto your earlobe. Close the earring carefully until it is secure.

  How to Make Guitar String Wraps on Your Guitar

Making Magnetic Earrings

How to make fake earrings #7
To make your earrings, choose two pieces that are similar in color and have a flat back.

1. To make your earrings, choose two pieces that are similar in color and have a flat back. They may be beautiful beads, buttons, or rhinestones. Choose something that is the size of your earlobe and is not too hefty.
If you’re using coat buttons or stud earrings, use wire cutters to remove the prong or loop. If you are a youngster, you should have an adult assist you with this step.

How to make fake earrings #8
Four tiny, disk-shaped magnets should be chosen.

2. Four tiny, disk-shaped magnets should be chosen. Make sure the magnets are of the same size and just a little smaller than your jewelry. Use magnets designed particularly for earrings; you may get them in an art store’s beading area. If you can’t locate any, any little, spherical magnet will suffice. Regular black magnets will be the least uncomfortable to wear, but they will be weak. Silver “rare earth” magnets will be more powerful, but they may be more unpleasant for certain individuals.
Avoid using silver-colored “rare earth” magnets if you have sensitive hearing. They are excessively powerful and might pierce your ears.

How to make fake earrings #8
Apply adhesive to the backs of two of the magnets.

3. Apply adhesive to the backs of two of the magnets. Set the remaining magnets aside for later use.

How to make fake earrings #9
Place the two things, flat side down, into the glue.

4. Place the two things, flat side down, into the glue. Position them so that the magnet poking out from below is hidden. Because the magnets are spherical, it makes no difference whether your object is glued upside down or right side up.

How to make fake earrings #10
Allow the adhesive to cure.

5. Allow the adhesive to cure. This should just take a few minutes, but you should check the glue package for particular drying timeframes. Make sure the magnets are spaced far enough apart so that they don’t attract and attach to each other.

How to make fake earrings #11
Put on the earrings.

6. Put on the earrings. Take an earring and place it on the front of your earlobe. Pick up a basic magnet and place it behind your earlobe. If the magnets aren’t sticking, try flipping the simple magnet over. When the magnets have adhered, let go and put the second earring on.
Before showing off your earrings, check them in the mirror to ensure that they are all pointing in the same direction.

  How to Stretch a Wool Sweater

Making Clip-On Earrings

How to make fake earrings #12
To make your earrings, choose two pieces that are similar in color and have a flat back.

1. To make your earrings, choose two pieces that are similar in color and have a flat back. They may be beautiful beads, buttons, or rhinestones. Choose something that is the size of your earlobe and is not too hefty.
If you’re using coat buttons or stud earrings, use wire cutters to remove the prong or loop. If you are a youngster, you should have an adult assist you with this step.

How to make fake earrings #13
Select a set of clip-on earring backs.

2. Select a set of clip-on earring backs. Clip-on earring backs are classified into two types: slim with a bar in front and bigger with a disk shape. The slender variety is more discreet, but it is more unpleasant to wear. The bigger ones will be less unpleasant to wear and simpler to decorate. Purchase some clip-on earring pads. Slip them over the back of your clip-on earrings to make them more comfortable to wear.

How to make fake earrings #14
Apply super glue to the front of the clip-on earring backs.

3. Apply super glue to the front of the clip-on earring backs. Make careful to equally cover the whole front. Don’t use any adhesive on your item.

How to make fake earrings #15
Place the two things, flat side down, into the glue.

4. Place the two things, flat side down, into the glue. Check that they are facing the proper way up.

How to make fake earrings #16
Allow the adhesive to cure.

5. Allow the adhesive to cure. Depending on the kind of glue, this should just take a few minutes. Refer to the bottle label for more detailed drying periods.

How to make fake earrings #17
Put on the earrings.

6. Put on the earrings. Pull the earring open and place it over your earlobe. Put the earring back on. When removing an earring, do not yank or tug it off. This may cause the earring to get damaged. Instead, open the earring backwards first, then remove the earring.

  Learn how to Make College Time Fly

Similar Posts