How to Set Up a Wireless Router

Rate this post

Setting up your new wireless router does not have to be difficult. This we will take you through each stage of the process—connecting the hardware, configuring your router, and having your devices connected and ready to go—so you can enjoy your new wireless internet connection (without any headaches).

You are viewing article How to Set Up a Wireless Router at website answerforyou.net.

Connecting the Hardware

1. Get a wireless router. Routers come in a variety of forms and sizes. Compare features to get the best router for you. If you need to cover a larger area or have many walls in your house, you’ll need a router that allows you to upgrade the antenna(s) to high gain varieties if they aren’t included. If more than one wireless device is connected at various speeds at the same time, a MiMo router is advised; otherwise, the speed for all devices will decrease to the highest supported by all at that moment.
802.11n, or Wireless-N, should be supported by all contemporary routers. This is the most stable, has the quickest speeds, and is compatible with previous standards like 802.11g.

2. Connect your modem to your router.

3. Routers and wireless routers allow you to distribute your broadband internet connection to various devices. To do this, connect your internet modem to the router. Place your router near your modem for the greatest results.

  • An Ethernet cable should be used to connect the router and modem. Most routers come with a short Ethernet wire that may be used for this purpose.
  • Connect the modem to your router’s WAN / Internet port. It is frequently offset and of a different hue than the LAN Ports. WAN is an abbreviation for “Wide Area Network,” which is what the internet is. LAN is an abbreviation for “Local Area Network.” From a pool of private addresses, the router will issue a local or “private” IP address to any device connected to its LAN Ports or WiFi signal (listed further below).

4. Connect any hardwired devices using CAT 5 (or greater) Ethernet connections. If you have nearby PCs, a video game console, or a television, you may connect them to the router through Ethernet. This results in a more reliable and quicker connection and requires no further settings.

5. Connect at least one computer to the network using Ethernet. To modify your network settings, you will need at least one computer connected via Ethernet connection. If you wish to connect wirelessly, you may detach this PC. When you initially connect your laptop wirelessly, the wifi network name and default password will be written on the router’s label.

  How to Get Rid of Puffy Eyes from Crying

Connecting Your Router To Broadband Providers

1. When you turn on the router, it will only build its own wireless network, and the device will be linked to the router’s wireless network rather than the internet. To connect the router to the internet, certain internet service providers (for example, GTPL in India) demand that the router’s MAC address be registered on the internet service provider’s website.
The router’s MAC address may be found printed on the router or in documentation, for example.

2. Navigate to the website of your internet service provider. Log in using your internet service provider’s login and password and choose the MAC address update option. The MAC address of one’s current laptop or computer may be found there. Save the MAC address of the router there. This procedure certifies that the router is permitted to utilize the internet service provided by the broadband provider.

Configuring the Router

1. Determine the router’s IP address. Determine the default IP address, which may be displayed on a sticker fastened to the router or in the paperwork if this is a fresh installation or new router. If you can’t locate the router’s IP address anywhere, you may look up the router model on the internet to discover what the default address is.

  • IP addresses are split by periods into four groups of up to three digits.
  • 192.168.0.1, 192.168.1.1, 192.168.2.1, and 10.0.0.1 are common “default” Local IP addresses for routers. All of the addresses in the following ranges have been set aside for exclusive use in a LAN: 192.168.0.0 – 192.168.255.255, 172.16.0.0 – 172.31.255.255, and 10.0.0.0 – 10.255.255.255; and one address in the range of any of them would be allocated to the connected router.

2. Launch a web browser on the router-connected PC. Enter the router’s IP address into the address box and click Enter. Your browser will try to access the router’s settings menu.
If your router comes with an installation disc, you may use it to run the setup application instead. It will do many of the same duties.

3. Enter your login information. You must be on the router’s IP address and provide a valid login and password at the prompt to access the configuration page. Most routers include a default account that you must use to log in. This varies by model, but it should be listed on the router or in the manual.

  • The most common username is “admin.”
  • The most often used passwords are “admin” and “password.”
  • Many routers just need a username and a password, while others let you leave all entries blank.
  • If you can’t remember your IP address, username, or password, look up your router model online to discover what the default login is. If it has been altered, click the Reset button on the back of the router for 10 (to 30+ seconds, depending on the router type) seconds to restore factory settings and try again.
  How to Make a Cool Fire Dragon in Dragon City

4. Navigate to Wireless Settings. When you log in to your router, you are directed to the main menu or status screen. There will be various possibilities from which to pick. Unless you have received explicit instructions from your internet service provider, you may typically leave the Internet area at its default settings. You may configure your wireless network under the Wireless section.

5. Give your wireless network a name. You should see a field titled SSID or Name in the Wireless section. Give your wireless network a distinct name. When other devices check for networks, they will notice this.
To enable SSID broadcast, check the box. This effectively “turns on” the wireless network, making it visible to anybody within range of the signal. For further details on the SSID configuration, see the Tips section below.

6. Select a security mechanism. Select from the available security settings. Choose WPA2-PSK as the encryption option for maximum security. This is the most toughest security to breach, but it will provide the greatest protection against hackers and attackers.

7. Make a password for yourself. After you’ve decided on your security strategy, create a network passphrase. This should be a tough password made up of letters, numbers, and symbols. Use no passwords that are readily guessed from your network name or from knowing who you are.

8. Save your preferences. When you’ve completed identifying and protecting your wireless network, click the Apply or Save option. It may take a few seconds for the modifications to be implemented to your router. Your wireless network will be activated after the router has been rebooted.

9. Change the default username and password for your router. After you’ve setup your network, you should update the username and password you use to access your router. This will assist to safeguard your router from unauthorized alterations. These may be changed in the Administration part of the router setup menu.

10. Sites should be blocked. If you wish to prohibit devices connected to your network from visiting certain websites, you may use built-in blocking capabilities. These may be located in the router’s Security/Block section.
Typically, you may block based on particular domain names or phrases.

Connecting Your Devices

1. Join the wireless network using a computer, tablet, or smartphone. Scan for a wireless network using the SSID you specified above. As long as you are within range of the router, you should be able to see your new network on any device that supports wireless networks. When you choose it, you will be requested for your password.

  How to Convert Seconds Into Hours

2. Enter your wifi password here. Your device will be instantly linked to the wireless network when you input the passcode. The network will be saved in your device’s memory and will connect automatically anytime you are in range.
Follow this tutorial for full steps on choosing and joining a wireless network for your particular computer, tablet, or smartphone.

3. Connect any more devices. Other than laptops and tablets, you may connect printers, gaming consoles, televisions, and other devices. Instructions for your individual device may be found in the following guides.

  • Set up a wireless printer.
  • Connect a wireless network to a PlayStation 3.
  • Connect a wireless network to an Xbox 360.
  • Connect a wireless network to a Nintendo Wii.
  • Join Apple TV to your wireless network.

How do I set up a new wireless router?

Step 1: Set up your wireless router.
Step 2: Set up your wireless router’s gateway. …
Connect your gateway to your new router in step three. …
Step 4: Change the admin password on your wireless router. …
Step 5: Update the firmware on the router. …
Step 6: Create a password for your wireless network. …
Step 7: Have fun with your Wi-Fi network!

Can I set up WiFi router myself?

If your property is adequately wired for internet service and your provider offers self-installation, you may install internet yourself. Self-installation isn’t always an option—due to wiring concerns and other obstacles, some companies need a professional to install your internet connection.

How do you connect a wireless router to the internet?

Connect one end of the Ethernet wire to your modem. Connect the opposite end of the Ethernet cable to your router’s Internet, Uplink, WAN, or WLAN port. Connect your router and wait 2 to 3 minutes for it to light up. Connect an Ethernet wire to your computer and turn it off.

Do you need a WiFi provider for a wireless router?

Do You Have To Pay For Internet If You Buy A Wireless Router? If you want to use your wireless router as a WiFi device at home or at work, you must pay for internet access. You can only view the router dashboard on your browser if it is not connected to an internet modem.

Can I just plug in a wireless router?

You may connect your router to your modem at the same time. Instead of connecting the modem to your computer, connect it to the router using an Ethernet wire. Then, using a second Ethernet wire, connect the router to your computer.

Do you need a modem and a router?

Traditionally, routers and modems were two different devices that worked together to establish your home network. However, with today’s technology, you don’t absolutely need a separate modem and router, since modern combination modem and router systems combine the operations of the two devices into one powerful gadget.

Similar Posts