Do you really need your hair cut but don’t want to spend the salon price? Or are you in between haircuts and need to look fantastic quickly? Here’s a simple tutorial on trimming your own hair at home for less money. Although you should never give yourself a complete haircut [for example, having waist-length hair and attempting to cut it to your shoulders], you may give yourself a salon-quality trim of around 1–3 inches (2.5–7.6 cm) off the ends. This guide will assist you.
Washing and Preparing Your Hair
1. You should wash your hair. Before you begin cutting, use a gentle wash and ensure that your hair is clean and clear of any hair-care products.
- Conditioning is optional, however it may aid in the removal of knots.
- Rinse your hair until there are no remaining bubbles or soap in the run-off. The water that comes out of your scalp should be pure and transparent.
- Hair that is very thick, curly, or coarse should be washed twice to ensure cleanliness.
2. Dry any excess moisture with a light cloth. Allow your hair to be moist rather than completely dry. This will make it easier to handle.
To keep the hair wet while it dries, use a spray bottle filled with water.
3. Wrap a towel across your shoulders. This will catch any drips and prevent hair from dripping down your shirt as you cut. It will also make cleanup easy afterward.
- A cloth or sheet may also be put on the ground to collect falling hair.
- If you have a hairdresser’s cape, use it.
4. You should brush your hair. Remove any tangles or knots by beginning at the ends and working your way up. Instead, if you have wavy or curly hair, use a wide-toothed comb.
It may be beneficial to re-moisten your hair.
5. Straighten your hair back. Begin at your brow and work your way down to the base of your neck using a fine or big tooth comb. It will be simpler to achieve clean, precisely straight portions after your hair is slicked back.
Clean parts are essential for creating good hair divisions.
6. You should part your hair. Draw the comb over the top of the scalp using the tip or edge of the comb, beginning just behind your left ear. When you reach the same location behind your right ear, come to a halt.
- The front segment will include anything in front of the component. Hold the comb at an angle, as if it were a knife.
- You may wish to use a larger-toothed comb depending on your hair type and thickness.
7. Brush the top portion of your hair forward. Remember that a clean portion is essential for attaining even parts, which results in a more equal trim.
8. Secure the front of your hair. Form pony tails using ties or bands to bring your hair away from the back of your head.
Clips are preferable for shorter hair.
9. Make a new part or segment in your hair. Draw a line across the back of your head that is parallel to the ground, using the tip of the comb in the same place as in the first phase. Finish slightly behind the other ear.
Hair above this area is referred to as the top, while hair below is referred to as the bottom.
10. As with the front, secure the top part. As required, use ties or clips.
The bottom should not be divided.
Trimming Your Hair
1. Make a scissor-like motion with your free hand’s index and middle fingers and “pinch” off two to three inches of hair. Make sure to choose hair from the bottom area and from one side of the head, not the center. This will serve as your guide cut.
- In this scenario, your freehand is the hand that will not be holding the sheers or scissors.
- Because you’ll be doing this frequently, be sure to be consistent with each squeeze.
2. Straighten this section of hair. Make a point of working out any knots or tangles and repeat as needed. Re-moistening your hair may be beneficial.
Depending on your hair type, a brush may be preferable for removing knots and tangles.
3. Run the comb through this section one again. Follow the comb along the length of your hair with your pinched fingers this time. Maintain a constant pinch while leaving about a quarter-inch space between your fingers and the comb.
- If you pinch too lightly, the hair will not sit properly, resulting in an uneven cut.
- There isn’t much stress required, so don’t feel compelled to squeeze too firmly.
- This stage does not need the use of a brush.
4. Stop moving your fingers one inch away from the tips. If you held your fingers appropriately throughout the comb—and the slide—you will see unequal growth at the ends.
- Repeat this many times, being careful to maintain uniform movements.
- The more consistent you are with this, the better your trim will be.
5. Make a guiding cut. Even out the ends of your hair by cutting parallel to your squeezed fingers using clean, sharp salon grade scissors or sheers.
- Trim each section of hair while keeping the present form in mind.
- You decide how much hair you want clipped.
- When cutting your own hair, it is helpful to stand in front of a mirror. However, getting accustomed to working with your mirror image might be challenging.
6. Pinch another section of hair off. This section should be directly next to the section of hair you just dealt with and should comprise around 25% of the hair you just clipped.
Once you’ve combed this section straight, you should be able to see the difference between hair that has been cut and hair that hasn’t. As a reference, use the trimmed hair.
7. Steps one through four should be repeated. Use the same scissor-pinch action each time.
There should be a clear distinction between trimmed and untrimmed hairs.
8. Even out your hair. Trim the growing hairs to extend the straight-edge line you made with your guide cut.
If necessary, take a few long breaths to steady your hand.
9. Work your way down to the bottom area. Steps one through five should be repeated as required.
10. Finish your trimming. After you’ve finished the bottom area of your hair, you may continue on to the top and then the front. Steps one through five should be repeated for each segment of hair until done.
Is it better to trim hair wet or dry?
Tripodi really suggests clipping hair when it’s somewhat moist for most textures. “If the hair has been towel-dried and a lot of moisture has been removed from it, but you can still see its natural texture, that’s a typically ideal time to cut it,” she says.
Is it better to cut your hair clean or dirty?
Although it is advised, washing your hair before a haircut is not required. Typically, a haircut is combined with hair styling. We don’t advocate getting unclean hair trimmed and groomed since you’ll need to wash it eventually, perhaps ruining the new look (and second-day hair).
What are the disadvantages of cutting dry hair?
The only significant downside to dry cutting hair is that perfect lines might be difficult to achieve. If you want an A-line or extremely blunt haircut, you should definitely have your hair trimmed while it’s still damp.
How often should you trim your hair?
If you’re growing out your hair, hairstylist Lisa Huff suggests cutting it every 12 weeks by a quarter to half an inch. Doing it more often will not result in faster hair growth. According to the American Academy of Dermatology, strands only develop around a half inch every month.
Why do hairdressers cut hair wet?
Wet hair allows stylists to cut your hair with precise lines. When you have wet hair, it is straight and controlled. Hairdressers prefer damp haircuts to avoid having to work around your hair’s natural movement when it’s dry, which may make obtaining blunt, clean cuts more difficult.
Should I shampoo after haircut?
Washing your hair after getting it cut will not affect the cut in any way. That is, if you want to wash your hair after having it cut because you don’t like the hairstyle they performed at the salon or there are some stray hairs bugging you, you may do so without fear.